Question: What is the purpose of a building inspection?

The purpose of a building inspection is to verify compliance with the minimum safety standards set forth in the adopted codes. At the inspection, the Building Inspector will review all work done, compare it to the approved plans or building code (as applicable) for compliance, and issue an inspection report.

What are the different types of inspection?

Types of inspection and methods of quality control inspections differ for a reason so its good to know the details.Sample Checking. Pre-Production Inspections (PPI) During Production Inspection (DPI) Pre-Shipment Inspection (PSI) Piece by Piece Inspection (or Sorting Inspection) Metal Detection. •17 Sep 2020

What is building condition assessment?

An assessment of the condition of the building is the process of examining the entire building and infrastructure components, including equipment for mechanical and electrical systems, building frames, internal structure and finishes as well as building sites [7].

What are the four phases of inspection?

The Inspection Process is divided into four phases: Sensitization, Pre-Inspection, Inspection and Quality Assurance.

What are the three types of inspection?

There are three primary types of quality inspections: pre-production, in-line, and final. There are a variety of details that must be inspected and approved during each phase in order to detect and correct quality problems.

Why do we do building conditions assessment?

Most lenders require a Building Condition Assessment to finalize the commercial loan, especially older buildings. The assessment gives the bank valuable information about the cost of ownership and the remaining useful life of the building.

Why do a facility condition assessment?

Facility Condition Assessments (FCAs) are typically prepared for owners or managers of real estate portfolios to help optimize and maintain the physical condition and value of their assets, develop capital budgets, and prioritize resources.

What is the process of inspection?

Inspections are a formal process used to identify and correct errors in a completed deliverable, before the deliverable is used as input to a subsequent deliverable. The focus of the inspection process is on finding defects, rather than solutions, which can divert the inspection meeting time.

What is the inspection method?

Inspection Method is usd to define procedure and execution method of an inspection in Inspection Method (T.code:QS31). It defines how an inspection is to be done as particular Inspection characteristics are inspected according to different procedure.

How do you assess the conditions of a building?

Condition assessment and evaluation is generally carried out in two levels: (i) Preliminary and (ii) detailed. If we get adequate information to assess the safety of the building at the preliminary investigation level, detailed investigation, which involves considerable cost and time, may not be recommended.

Contact us

Find us at the office

Sciarretta- Sega street no. 91, 86412 Thimphu, Bhutan

Give us a ring

Keiandra Manville
+25 561 918 290
Mon - Fri, 10:00-18:00

Say hello